PRODUCT OVERVIEW
Samsung AM920AXVANH1EA — DVM S2 · Heat pump · Energy efficiency
Samsung AM920AXVANH1EA has a rated cooling capacity of 257.6 kW (878,900 BTU/h). Heat-pump Energy efficiency combinations have dedicated component lists. Match the exact suffix and configuration rather than substituting Standard ratings at the same nominal horsepower.
Key features
01
Design and function
Heat-pump Energy efficiency combinations have dedicated component lists. Match the exact suffix and configuration rather than substituting Standard ratings at the same nominal horsepower.
02
Active AI control
The catalogue describes Active AI Pressure Control to adapt pressures to installation and usage, and Active AI Refrigerant Analysis to support refrigerant-state monitoring. Confirm available functions against the actual configuration and technical documentation.
03
Corrosion protection
Durafin Ultra and the casing design are described as improving corrosion resistance. Installation position, clearances and maintenance must suit the project environment.
04
Manufacturer-defined combinations
Component lists are retained for each combination code. Weight follows the printed manufacturer expression; combination sound uses the dedicated table value rather than an arithmetic sum of individual levels.
AM920AXVANH1EA · Rated values from the manufacturer catalogue
Rated capacity4
Rated capacity · AM920AXVANH1EA| Capacity HP | 92 |
|---|
| Cooling capacity (kW) | 257.6 |
|---|
| Cooling capacity (BTU/h) | 878,900 |
|---|
| Heating capacity (kW) | 284.2 |
|---|
Electrical & efficiency4
Electrical & efficiency · AM920AXVANH1EA| Power supply | 380~415 V · 3 phase · 4 wires · 50/60 Hz |
|---|
| Cooling power input (kW) | 64.11 |
|---|
| Heating power input (kW) | 61.8 |
|---|
| EER (W/W) | 4.02 |
|---|
Airflow & sound3
Airflow & sound · AM920AXVANH1EA| Catalogue sound pressure · dB(A) | 68 |
|---|
| Airflow in catalogue order (m³/min) | 330 x 1 + 412 x 1 + 330 x 2 |
|---|
| Maximum external static pressure (Pa) | 110 |
|---|
Dimensions & weight1
Dimensions & weight · AM920AXVANH1EA| Weight calculated as printed in the catalogue (kg) | 1167 |
|---|
Refrigerant & piping3
Refrigerant & piping · AM920AXVANH1EA| Refrigerant | R410A |
|---|
| Liquid pipe (mm) | 25.40 (1) |
|---|
| Gas pipe (mm) | 53.98 (2-1/8) |
|---|
Other specifications2
Other specifications · AM920AXVANH1EA| Minimum connected indoor capacity (kW) | 128.8 |
|---|
| Maximum connected indoor capacity (kW) | 334.9 |
|---|
Combination component units
Dimensions below describe each module. Total weight is calculated by adding component weights; installation dimensions must include manufacturer-specified clearances.
No matching specifications. Try another keyword.
Cooling capacity and electrical power input are different quantities. Check catalogue test conditions when selecting equipment. Sources & notes →
Applications & layout
Consider for offices, hotels, residences or commercial projects according to equipment type. Heat load and zone requirements determine the appropriate configuration.
Selection considerations
Match the complete model code and regional suffix. Correct actual capacity for temperatures, pipe length and height difference; verify configuration and compatibility using Samsung documentation or selection tools. Optional functions depend on supplied accessories and controllers.
Overview referenceSamsung DVM S2 / DVM S Eco (EN)Features describe the product range; model-specific ratings appear in the specification table. Applications are suggestions based on equipment type.
SOURCE DOCUMENTATION
Catalogue & notes
Model specifications reference Samsung DVM S2 / DVM S Eco (EN) · PDF page 142.
Rated values depend on test conditions and system combinations. Confirm optional features against the supplied configuration. The source document and edition are recorded for each model on this page.
The original English catalogue is shared by both languages; Vietnamese editorial content is translated.
