PRODUCT OVERVIEW
Panasonic S-22MF3E5AN – F3 adaptive ducted indoor unit
S-22MF3E5AN belongs to Panasonic’s F3 Mid Static Adaptive Ducted range, with a rated cooling capacity of 2.2 kW. Its concealed design distributes air through ductwork, allowing grilles to be positioned to suit the interior.
Key features
01
250 mm unit height
The catalogue specifies a 250 mm body height for the F3 range, supporting installations with limited ceiling space. Allow additional room for ducts, drainage and maintenance access.
02
Flexible mounting and air intake
F3 supports horizontal or vertical installation and rear or bottom air intake. Its drain-pan design accommodates both mounting orientations.
03
DC fan with up to 150 Pa external static pressure
The DC fan supports variable external static pressure, with a catalogue maximum of 150 Pa. Select the setting against actual duct-system pressure losses.
Indoor-unit power input excludes the outdoor unit’s power consumption.
S-22MF3E5AN · Rated values from the manufacturer catalogue
Rated capacity3
Rated capacity · S-22MF3E5AN| Cooling capacity (kW) | 2.2 |
|---|
| Cooling capacity (BTU/h) | 7,500 |
|---|
| Heating capacity (kW) | 2.5 |
|---|
Electrical & efficiency2
Electrical & efficiency · S-22MF3E5AN| Power supply | 220/230/240 V · 1 phase · 50/60 Hz |
|---|
| Cooling power input (kW) | 0.06 |
|---|
Airflow & sound2
Airflow & sound · S-22MF3E5AN| Sound pressure (H/M/L) · dB(A) | 31/28/20 |
|---|
| Catalogue airflow (m³/h) | 768/660/480 |
|---|
Dimensions & weight2
Dimensions & weight · S-22MF3E5AN| Dimensions H × W × D (mm) | 250 x 800 x 730 |
|---|
| Net weight (kg) | 26 |
|---|
Refrigerant & piping2
Refrigerant & piping · S-22MF3E5AN| Liquid pipe (mm) | 6.35 |
|---|
| Gas pipe (mm) | 12.7 |
|---|
No matching specifications. Try another keyword.
Cooling capacity and electrical power input are different quantities. Check catalogue test conditions when selecting equipment. Sources & notes →
Applications & layout
Consider for offices, shops and interiors where equipment is concealed and only air grilles remain visible. Design must account for airflow, static pressure and maintenance access.
Selection considerations
Controllers and ECONAVI sensors are shown as catalogue options; confirm the required accessory codes. This F3 indoor range must not be confused with FSV-EX MF3 heat-recovery outdoor units.
Overview referenceCatalogue Panasonic FSV (EN).pdfFeatures describe the product range; model-specific ratings appear in the specification table. Applications are suggestions based on equipment type.
SOURCE DOCUMENTATION
Catalogue & notes
Model specifications reference Catalogue Panasonic FSV (EN).pdf · PDF page 33.
Combined values retain the catalogue order for voltage, frequency or fan speed. Refer to the source-page notes before use.
Rated values depend on test conditions and system combinations. Confirm optional features against the supplied configuration. The source document and edition are recorded for each model on this page.
